Our services

What we're good at.

Professional auto glass replacements and repairs for all vehicle makes and models, brought to you. We also do calibrations.

Replacements

Professional glass replacement, done at your location. Open “What to expect” to see how the process works.

What to expect

The vehicle will need to be in an area that allows plenty of space around it. If it's in a garage, space above the vehicle is helpful.
Allow a couple of hours from the start of the replacement process to when the vehicle will be operational again.
The glass will need to be exposed, so parts of the vehicle will need to be removed. What is removed is determined by the make and model, along with which glass is being replaced (cowl, wipers, door panel, etc.).
Once the glass is exposed, the removal process can begin. Stationary glass is cut at the adhesive, most movable glass is tempered, and the glass is cleaned out. The technicians do their best to remove all broken glass, but we cannot guarantee all tempered glass will be removed from the vehicle due to the nature of tempered glass.
Any prep work is completed on the vehicle and glass to ensure the best bond to the vehicle.
Once the new glass is installed, all parts removed are installed back on the vehicle.

A repair keeps damage from spreading and restores the structural integrity of the glass. On average it takes about 30 minutes.

Can be repaired if…

The repair process

Damage is inspected to make sure it can be repaired.
The damage is opened up if needed, to allow the resin to enter.
Once the damage is filled, a UV light is applied to cure the resin.
A pit fill resin is used over the impact point of the damage.
The UV light is used a second time to cure the pit fill and finish curing the resins injected into the damage.
Once cured, excess resin is removed and polished to bring back a smooth surface to the windshield.

Some vehicles have driver-assistance cameras and sensors that may need calibrating after glass work. We also do calibrations.